Protects the front portions of your lens from water, dust, and scratches.
Center pinch design allows easy attachment and removal, even with a lens hood in place.
Pinch the sides of the cap and snap it into place. Includes lens cap keeper to prevent losses.
Material: high impact plastic. Color: Black.
Free Microfiber Cleaning Cloth 5.5×3.0″ included
Specification: 58mm Lens Cap Bundle – 4 Snap-on Lens Caps for DSLR Cameras – 4 Lens Cap Keepers – Microfiber Cleaning Cloth Included – Compatible Nikon, Canon,…
Assembly required
No
Batteries Required
No
13 reviews for 58mm Lens Cap Bundle – 4 Snap-on Lens Caps for DSLR Cameras – 4 Lens Cap Keepers – Microfiber Cleaning Cloth Included – Compatible Nikon, Canon,…
4.5out of 5
★★★★★
★★★★★
10
★★★★★
1
★★★★★
1
★★★★★
0
★★★★★
1
Write a review
Show allMost HelpfulHighest RatingLowest Rating
★★★★★
Garry Whitworth –
I lost the lens cap covers for my Canaon Rebel T3i camera a long time ago and finally found a good replacement producrt that was cost effective. Fast free shipping and they fit my 58mm lenses. Best part is there is a stretch stap that connects to the lense that keepts the lense cover conneted to the lense. All round greart prodict and feel good now that I hae lsnse coveres on my expensive lenses. Best part is I have a couple of extra now.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Jayrai –
I was so excited to get these. I am one who loses her lens caps often, and I loved the idea of having them hanging off of the lens at all times. Sadly, the strings break and the little stickers on the lens caps fall off. Every single one. On the bright side, I have four extra lens covers in my bag in case I ever need one. 🙂 So not a complete loss.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Amazon Customer –
Cheap product. The adhesive tape is not strong enough at all, and comes off after almost 3 weeks. Strings keep breaking from the bottom of the clip attached to the elastic part. I had them for a month and I do not even use my camera that often. Not sure if I ended up with a bad batch or these are really cheap…
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Samson Wan –
I have a number of lenses which I’ve attached adapters and filters to and they are all currently 58mm in size so having spare 58mm lens caps help a lot. I think the extra little strap and sticky mount is really good. I wrap the strap around the lens and stick the mounting to the lens so that if it does come off, it doesn’t go getting lost. I had never thought about having the lens cap like that. However, I don’t use it because when I do take the lens cap off, I don’t want it just hanging there. I’d rather put it in a safe place.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
A –
These lens caps certainly seem more secure than the Canon originals; and substantially cheaper. I find I lose the originals quite often. They seem to knock off easily and I don’t always notice them fall. These seem to lock in more securely and the secure line makes sure they won’t fall to the ground. I would probably remove the secure line from the lens in the studio as I wouldn’t want the cap dangling; but in the field it will be a must whilst walking. Make sure you are sure when putting the adhesive pad on the cap. Secure it certainly is. I couldn’t remove it. Obviously your lenses will not stand up on the cap end for storage.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Falee –
Awesome item. Just what I was looking for. I wanted something that would let me keep my lens caps within reach without having to hold it and not having to know where I put it down and losing it. This just hangs off my lens and it’s out of the way and I don’t have to worry about where I put it down to cover my lens back up after use.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Tonya –
I absolutely adore these lens caps! The little tether they come with is absolutely brilliant! No more fumbling with where to put the cap before taking photos. They fit perfectly (on my Olympus 58mm lenses) and seem very durable. Packaging was great as well. The lenses were individually wrapped and then packaged in a thick plastic ziploc-style pouch. They even sent a great little lint free cloth! The seller was awesome too, sending a nice little note after my order to make sure everything was satisfactory. I would happily recommend these.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Jorge D –
Hard to get excited about a lens cap. However, for the record, these lens caps are very well made and packages. I have used several and never had problems with fit, quality or lens protection. Not high tech, just a Very Good Product.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Allen –
I have purchased a lot of things from Camkix and have never been disappointed in their value or their quality. Amazon actually prevented me from reviewing them at one point because they thought I was working for them but I am just a happy customer. Highly recommend any of their products.
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Neil Taylor –
I recently lost a 58mm lens cap, while at a festival for the weekend. Cursing, I nursed the lens through the rest of the weekend, and looked for a replacement when I got back online. The bundle of 4 lens caps was a surprise idea, but is practical (and inexpensive): I now have the replacement on the lens, and a spare in the camera bag. While I was at it, I bought 4 of the 67mm for my longer lens, and keep 1 of each in the bag. Now if I lose one, I have the replacement ready and to hand… in the right place!
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Ana –
I dropped one of my lens caps and so went to Amazon to buy another Canon-branded one, but then I saw these were cheaper than even one of the Canon ones and had good reviews so I went for it – I thought it was probably good to have spares for the next time that I lose one! Very pleased with this purchase – the style of the cap suits me better than the Canon ones and they feel more secure (my Canon one used to fall off of its own accord from time to time).
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
sarahm –
This was afraction of the cost of branded caps and does the job perfectly. Since I tavel alot i inevitably lose lens caps now and again so paying out for a branded one makes no sense when alternatives are available which are perfectly good. I can’t say if the branded one would be sturdier or last longer – these are ideal, good quality and don’t feel cheap
Helpful(0)Unhelpful(0)You have already voted this
★★★★★
Alain –
The clips are a little difficult to pinch but then that is sometimes better to avoid them falling off. Would have been better also to have longer strings to be used on the cap holes instead of the adhesive, but that’s ok. The qty of them is more than I will ever need. 1 is actually enough. If I change lens the same cap stays attached to the body so no need to have more than 1.
Garry Whitworth –
I lost the lens cap covers for my Canaon Rebel T3i camera a long time ago and finally found a good replacement producrt that was cost effective. Fast free shipping and they fit my 58mm lenses. Best part is there is a stretch stap that connects to the lense that keepts the lense cover conneted to the lense. All round greart prodict and feel good now that I hae lsnse coveres on my expensive lenses. Best part is I have a couple of extra now.
Jayrai –
I was so excited to get these. I am one who loses her lens caps often, and I loved the idea of having them hanging off of the lens at all times. Sadly, the strings break and the little stickers on the lens caps fall off. Every single one.
On the bright side, I have four extra lens covers in my bag in case I ever need one. 🙂 So not a complete loss.
Amazon Customer –
Cheap product. The adhesive tape is not strong enough at all, and comes off after almost 3 weeks. Strings keep breaking from the bottom of the clip attached to the elastic part. I had them for a month and I do not even use my camera that often. Not sure if I ended up with a bad batch or these are really cheap…
Samson Wan –
I have a number of lenses which I’ve attached adapters and filters to and they are all currently 58mm in size so having spare 58mm lens caps help a lot. I think the extra little strap and sticky mount is really good. I wrap the strap around the lens and stick the mounting to the lens so that if it does come off, it doesn’t go getting lost. I had never thought about having the lens cap like that. However, I don’t use it because when I do take the lens cap off, I don’t want it just hanging there. I’d rather put it in a safe place.
A –
These lens caps certainly seem more secure than the Canon originals; and substantially cheaper.
I find I lose the originals quite often. They seem to knock off easily and I don’t always notice them fall.
These seem to lock in more securely and the secure line makes sure they won’t fall to the ground.
I would probably remove the secure line from the lens in the studio as I wouldn’t want the cap dangling; but in the field it will be a must whilst walking.
Make sure you are sure when putting the adhesive pad on the cap. Secure it certainly is. I couldn’t remove it.
Obviously your lenses will not stand up on the cap end for storage.
Falee –
Awesome item. Just what I was looking for. I wanted something that would let me keep my lens caps within reach without having to hold it and not having to know where I put it down and losing it. This just hangs off my lens and it’s out of the way and I don’t have to worry about where I put it down to cover my lens back up after use.
Tonya –
I absolutely adore these lens caps! The little tether they come with is absolutely brilliant! No more fumbling with where to put the cap before taking photos. They fit perfectly (on my Olympus 58mm lenses) and seem very durable. Packaging was great as well. The lenses were individually wrapped and then packaged in a thick plastic ziploc-style pouch. They even sent a great little lint free cloth! The seller was awesome too, sending a nice little note after my order to make sure everything was satisfactory. I would happily recommend these.
Jorge D –
Hard to get excited about a lens cap. However, for the record, these lens caps are very well made and packages. I have used several and never had problems with fit, quality or lens protection. Not high tech, just a Very Good Product.
Allen –
I have purchased a lot of things from Camkix and have never been disappointed in their value or their quality. Amazon actually prevented me from reviewing them at one point because they thought I was working for them but I am just a happy customer. Highly recommend any of their products.
Neil Taylor –
I recently lost a 58mm lens cap, while at a festival for the weekend. Cursing, I nursed the lens through the rest of the weekend, and looked for a replacement when I got back online. The bundle of 4 lens caps was a surprise idea, but is practical (and inexpensive): I now have the replacement on the lens, and a spare in the camera bag.
While I was at it, I bought 4 of the 67mm for my longer lens, and keep 1 of each in the bag.
Now if I lose one, I have the replacement ready and to hand… in the right place!
Ana –
I dropped one of my lens caps and so went to Amazon to buy another Canon-branded one, but then I saw these were cheaper than even one of the Canon ones and had good reviews so I went for it – I thought it was probably good to have spares for the next time that I lose one! Very pleased with this purchase – the style of the cap suits me better than the Canon ones and they feel more secure (my Canon one used to fall off of its own accord from time to time).
sarahm –
This was afraction of the cost of branded caps and does the job perfectly. Since I tavel alot i inevitably lose lens caps now and again so paying out for a branded one makes no sense when alternatives are available which are perfectly good. I can’t say if the branded one would be sturdier or last longer – these are ideal, good quality and don’t feel cheap
Alain –
The clips are a little difficult to pinch but then that is sometimes better to avoid them falling off. Would have been better also to have longer strings to be used on the cap holes instead of the adhesive, but that’s ok. The qty of them is more than I will ever need. 1 is actually enough. If I change lens the same cap stays attached to the body so no need to have more than 1.