BestOffice Office Chair Desk Gaming Racing High Back Computer Task Swivel Executive Stool with Lumbar Support, Black
- All prices mentioned above are in Canadian dollar.
- At amazon.ca you can purchase BestOffice Office Chair Desk Gaming Racing High Back Computer Task Swivel Executive Stool with Lumbar Support, Black for only
- The lowest price of BestOffice Office Chair Desk Gaming Racing High Back Computer Task Swivel Executive Stool with Lumbar Support, Black was obtained on February 14, 2025 2:28 am.
Set Lowest Price Alert
×
Notify me, when price drops
Set Alert for Product: BestOffice Office Chair Desk Gaming Racing High Back Computer Task Swivel Executive Stool with Lumbar Support, Black -
Last Amazon price update was: February 14, 2025 2:28 am
×
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com (Amazon.in, Amazon.co.uk, Amazon.de, etc) at the time of purchase will apply to the purchase of this product.
Last updated on February 21, 2025 10:12 am Details
Madkat –
This item arrived whiten the same week I ordered it. I thought there was no way I was going to put it together(.can’t figure out the tilt but that’s OK). It was really easy. I sit at my computer for hours a day. Its comfortable good support.great chair for the price. 2 weeks in so far so good!!
Andrew Weisler –
Although I was unsure of the chairs at first, I ordered them based on price and I needed chairs for my office. When I ordered, I forgot to verify the color, and it was ordered as Black only. The picture displayed on Amazon showed the Red and Black, until I realized later that the invoice showed only Black. I messaged the company about the chairs indicating that I wanted the Red and Black, and they were quick to change the order to ensure I had the correct ones.
The chairs arrived in a timely manor, ahead of schedule. They were exactly what I wanted with color. The assembly was extremely easy, and came with the Allen Key wrench to put them together.
Once they were together, and my wife and I tried them out, Not expecting the comfort to be the best of the best for the price, We in turn were extremely satisfied with the comfort, and the quality of these chairs.
I am opening up a Hot Rod Car Club, and plan to order these chairs for my board room and office as well.
Great Product. Highly Recommend these.
Andrew – Guelph, Ontario, Canada
kav –
The back of the chair isn’t a really upright/has a right angle with the bottom, it’s tilted a bit backwards which is annoying. This is forcing me to sit upright, which is good, but also means the back of the chair is quite useless. Overall, i don’t feel comfortable enough in this chairs as I do in my old chair or my office chair at work.
You can’t lock the chair in tilt position either (this one was already in the ad or reviews and I was aware of it, but it’s more annoying than I thought).
Worst part is the material that is already showing signs of wear and tear after only a few days of use.
The knob that should make it easier or harder to tilt the chair doesn’t work properly either.
I would not recommend this chair. Specially since I then saw a much better chair at the same price at one of these chain super markets that I’m not sure if I’m allowed to name in a review.
M –
I saw a bunch of reviews talking about how this chair was the worst and it’s terrible etc.
I’m trying it after my $50 Ikea chair gave up after 10 years and I can say this is not a bad chair.
It’s fairly sturdy so far, it’s not uncomfortable, it has arm padding, the butt padding isn’t the MOST comfortable in the world like it doesn’t feel like you’re sitting on a cloud but it’s perfectly fine, I won’t be putting a pillow or anything under me.
Shipped to me a lot faster than I thought it would and assembly was easy, came with the tools you need.
Wasn’t aware it vibrated and I doubted I’d use that option but it’s actually somewhat nice, cat will probably like it too.
Overall good chair, would recommend to anyone who doesn’t have specific ergonomic needs.
Amazon Customer –
First off customer care is amazing, the chair it’s self though….. my 4 year old daughter could do a better job. The patterns were all off nothing was placed right. The cushioning on the seat is uneven. Same with the lumbar support was uneven. I would not recommend buying this chair.
Nicholas Gobbett –
I had this chair for a few months before the left arm piece completely cracked open. I contacted the seller to see if I could buy another left arm piece. Their first response was “the chair is no longer under warranty”. I wrote back to let them know I wasn’t asking about the warranty, but if I could purchase a new left arm piece. The next response was “we do not sell parts at this moment”. Needless to say, it’s a poor quality product in my opinion and I will not be purchasing from them again.
R –
I needed a chair to work from home. Any office chair are hundreds of dollars, but this chair seemed very reasonable. My son has a gaming chair, so I thought I’d try it out. I have been sitting in it a lot of hours and it seems to be decent. It has a bit of support in the lumbar region, but all in all, comfortable.
Update: The foam in the chair has not held up to a couple months of working from home. It’s now hard and not comfortable at all. Now searching for a new chair. 🙁
Sweet_D –
Bought 3 of the red ones for Christmas.
They are exactly as I ordered and arrived in great condition. By the time I was working on the third assembly, I figured some tips might help others.
Follow these for ease: place the “mechanism” on the floor with the weight knob up. Insert the “gas lift” into the mechanism. Press the “Central base tube” onto the gas lift (should be my first picture)
Slide all 5 “split base tubes” onto the central base. Start all 10 screws a few turns then tightened after all are installed. Press the wheels into place. Next, take the “seat” and place it on the floor cushion down (should be second photo) place the bottom onto the seat like in the photo. Again, start every screw before you tightened one down. Flip the chair upright and put on the arms. Start both screws but only tighten the front screw (should be third picture). You can use the 2 openings in the “back” as a handle (should be forth photo) start the bottom screws on both sides (last photo) then the top 2 on both sides. Tighten everything now and happy sitting
Dan –
I have had the blue version of this chair for a while now. I recently brought it into work where I use it daily. You can’t beat the price. I do wish the arms were spaced slightly further apart, but that’s a minor inconvenience and I’m a larger guy (6’1″, 250 lbs). Otherwise, the arms themselves are padded and are comfortable, and the seat (although bit thin) is still comfortable as well. I like how the lower back is a bit protruded as this offers some lumbar support. The design of the chair is pretty cool, and I frequently get compliments on it. The highback is great for those moments when you need to throw your head back, stare at the ceiling, and relax because that coworker down the hall is nagging you about that latest project deadline. Others have mentioned that it’s loud and squeaks, but I do not have this problem. It’s pretty quiet and the wheels roll nicely without a mat underneath.
Steve –
For the price you’re paying, you really have to set your expectations accordingly. I’ve owned several $300+ chairs with similar design styles, but the build quality is definitely different. The chair arrived in a decently solid box and was easy enough to assemble (around 15 minutes from start to finish). After 6 months of use, I’m still surprised how wobbly the arm rests are even though I’ve tightened down the screws. The material on the armrests are also pretty low quality as pushing it under my desk was enough to scratch and rip it up. Another thing is the lumbar support feels weird to me. Then again, every chair type product has their unique lumbar support and I honestly would have liked it to be flat so I can add my own lumbar support as needed. And lastly, this chair is loud. It squeaks a lot. Whenever I turn in it, adjust my weight, (or even look at it seems), it makes a good amount of squeaking noise.
But overall, 6 months in, still functional so that’s always a plus.
Rick –
Overall: only buy for kids or tiny adults.
Have had the chair for a year now, and at first it was fine. Buuuuut, now the butt cushion doesn’t exist and is hard as a rock (I currently have a blanket and a pillow that I sit on while in the chair).
The chair also squeaks when you try to lounge back, screws are starting to fall out, and overall getting hard to maintain. Could be a decent chair for smaller people or kids, but I’m 22 yo male at 190 pounds and I wouldn’t ever buy it again.
Currently looking for a ergonomic chair.
Gromaholic –
I purchased this chair thinking it was going to be a cheap gaming chair but once I received it I was surprised about how well built it is. I use it everyday when I sit in my office and it is very comfortable. It doesn’t make your bottom numb and it is a good looking chair. When you see it you would think it’s a $200 chair because of the quality.
Easy to put together, 5 mins tops. Comes with instructions. Not heavy at all compared to other gaming chairs. Love the price!
Anonymous999 –
It looks pretty good and feels decently comfy. I work from home and use this 8-9 hours a day, 5 days a week and I never get sore. I have a few complaints though….the set up was way more of a pain than I felt it had to be. To get the fourth screw in to the bottom I highly recommend you don’t screw any of the screws in fully or it will be impossible to get the last one. Screw them all in partially and slowly take turns screwing them all in back and forth. Trust me.
It also seems like the arms are made from a sort of cheap material. The Black starts to come off on the sides pretty easily just from regularly rubbing against my desk. Wear and tear is expected but I’ve had it for about 2 weeks. Overall a pretty regular chair, but I do feel it should maybe have been $10 less.