NB North Bayou Dual Monitor Desk Mount Stand Full Motion Swivel Computer Monitor Arm for Two Screens 17-27 Inch with 4.4~19.8lbs load capacity for…
- All prices mentioned above are in Canadian dollar.
- At amazon.ca you can purchase NB North Bayou Dual Monitor Arm Ultra Wide Full Motion Swivel Monitor Mount with Gas Spring for 22''-32'' Monitors with Load Capacity from 4.4 to 33lbs for Each Arm Height Adjustable Monitor Stand G32-B for only
- The lowest price of NB North Bayou Dual Monitor Arm Ultra Wide Full Motion Swivel Monitor Mount with Gas Spring for 22''-32'' Monitors with Load Capacity from 4.4 to 33lbs for Each Arm Height Adjustable Monitor Stand G32-B was obtained on February 3, 2024 11:03 am.
Last Amazon price update was: February 3, 2024 11:03 am
×
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com (Amazon.in, Amazon.co.uk, Amazon.de, etc) at the time of purchase will apply to the purchase of this product.
Last updated on August 29, 2024 11:56 am Details
NB North Bayou Dual Monitor Desk Mount Stand Full Motion Swivel Computer Monitor Arm for Two Screens 17-27 Inch with 4.4~19.8lbs load capacity for…
$60.00
Description
- TWO MONITORS AT ONCE: Fits most 17”- 27” Monitors with the load from 4.4 -19.8 lbs (2-9KG) for each monitor, VESA compliant patterns 75x75mm or 100x100mm; While the whole VESA Plate of this product is 120*120mm,Pls pay special attention to the size of VESA Plate if your monitor are curved monitor, Or your VESA hole is inside a recession area.
- FULLY ADJUSTABLE RANGE: Your two screens will have 360° rotation, tilt angle +85° to -30°, swivel ±90° Upright up to 10″(260mm) and max extension is 21″(535mm). Both arms of the desk mount can be easily adjusted anyway you would like.
- ERGONOMICS: Improve your overall well being by creating most comfortable viewing angle for work or gaming- Enjoy the freedom to adjust your monitor height and angle: Your spine, neck and shoulder will be thankful
- DESK CLAMP OR GROMMET: You can choose one of two available ways of installation – C-Clamp or Grommet mount. The diameter of the hole in your desk must be 0.39-1.97 inch,Desk thickness must be within 3.54 inch,
- Kindly noted: (1) USB CABLES are NOT PROVIDED, The USB hole on the basis is ONLY for DIY purposes. (2) Monitor Cables and Cable Tie are NOT PROVIDED (3) Pls DON’T adjust the tension screw without the monitor mounted on it (4) Adjust method: If the monitor keep rising up, Pls reduce the tension screw (to the direction of “-“) On the contrary, Turn to “+”
Additional information
Specification: NB North Bayou Dual Monitor Desk Mount Stand Full Motion Swivel Computer Monitor Arm for Two Screens 17-27 Inch with 4.4~19.8lbs load capacity for…
|
Price History
-
Reviews (13)
13 reviews for NB North Bayou Dual Monitor Desk Mount Stand Full Motion Swivel Computer Monitor Arm for Two Screens 17-27 Inch with 4.4~19.8lbs load capacity for…
Show all
Most Helpful
Highest Rating
Lowest Rating
john –
Don’t buy this, it won’t fit in the back of your monitor if the mount is recessed. I had to cut of pieces of my monitor to actually get it to fit. Also, being a cheap gas spring, it is very wobbly. Do not buy.
If you *really* want a gas spring monitor (why?), DO NOT cheap out on it, it will suck. Pay $150+ for a quality one.
Or, just go the more reasonable route and get a normal mechanical monitor stand.
Sanakh –
Hello,
Deux reproches à faire d’entrée de jeu :
Le système de câble management est une horreur, notamment car il y a des VIS, donc à VISSER, autrement dit vos câbles sont bloqués et si vous voulez en sortir un, ou en rajouter un, vous devez ressortir un tournevis, dévisser les 2 bouts de plastiques (2 par bras), mettre les câbles (pas facile car pas énormément de place), revisser, enfin bref, une galère, et quand c’est sur un bureau contre le mur, c’est impossible de dévisser, trop étroit, on se tord dans tous les sens, donc obligé de décoller le bureau du mur, passer derrière, etc etc, bref, une horreur, perso j’ai décider de ne pas utiliser les bouts de plastiques servis en guise de câble management, à la place j’ai utilisé des petites sangles velcros que j’ai récupéré d’autres appareils, bien plus pratiques, et au moins le bras est moins grossier, il semble plus fin…
Second reproche, je rejoins le commentaire d’un utilisateur qui émet une critique sur le fait qu’il n’y a pas de ports USB inclus. En fait, il y a juste un emplacement pour mettre des ports USB, autrement dit c’est à vous de vous débrouiller pour acheter 2 rallonges USB et les caler au bon endroit, je ne vois même d’ailleurs pas comment ça tiendrait ???
Donc point négatif, vraiment à ce niveau, c’est de la bêtise à l’état pur, surtout que je ne suis pas mauvais en anglais, et clairement, sur les photos et description, on comprend qu’il y a 2 ports USB inclus, même sur les photos dans le manuel, on y voit 2 ports USB, or rien à signaler, ils n’existent pas, simplement des trous en forme de ports USB qu’on peut choisir de faire apparaître ou non.
A part ça, ça semble solide, pas très discret mais ça fait le taff, j’ai deux écrans 24″ pas très lourds, ça se monte facilement, en soit, le pied arrive quasiment déjà complètement monté, il n’y a que le support à mettre.
Les écrans sont stables, ne bougent pas, facilement maniable, donc top à ce niveau là.
En revanche le design est un peu grossier, un peu chantier, enfin bref, pas très très joli, mais je préférais ça plutôt qu’aux bras plus fins mais difficilement articulables, et pas réglables en hauteur.
Je ne sais pas si je recommande ce modèle, je pense que d’autres modèles mieux existent, notamment au niveau du câble management, pour moi de simples crochets pour ranger les câbles et les faire suivre le bras seraient beaucoup mieux, mais bon …
Merci de m’avoir lu, j’espère vous avoir éclairé.
Hugh J. –
Amazing value product, assembly was a bit weird but overall super easy. Absolutely thrilled to have so much room. Would love more vertical adjustment but for the price can’t complain.
NVM-Ca –
Works great, no loose joints and clear instructions on adjustments, nice to have in-built cable management. Minor complaint that it doesn’t fully rotate around the base (there is a stop) which made it tricky to position monitors with a desk against a wall (little clearance behind desk). Work around: remove one of the lower arm cable management plastic covers to allow one arm to rotate over the other.
JonTheWong –
Just finished installing the mount took me 15 minutes. The quality is excellent, its sturdy and the range of motion and stiffness is perfect. My screens are extremely light so it feels fragile when i pull and push them but thats no fault of this mount. Everything was easy, as the headline says the screens hang 1 foot above the base so it might be a little high for some people. I’m waiting for my Secretlabs Titan XL and based on my measurements it will sit with my head back and ill be able to tilt the screens a tad to achieve ner-d-vana!
Kelvin C. –
Given the many positive reviews I figured it wouldn’t be a poor choice to try these monitor arms. Sure enough the install was easy, the arms were super sturdy without any wobble, and solid construction all around. If there was one thing I wished it could do was extend more vertically for sit/stand application. I find myself looking down at the monitors because it can’t be adjusted high enough. Careful when loosening the velcro straps that hold the arms together, they spring out quickly!
Buva –
If there was more flexibility at the bottom part of this product where it is fixed, it would provide more solutions and would be able to raise monitors even higher , enabling monitors on their own stand to be under the monitors mounted on this arm. If possible to make the bottom part adjustable in that way like the middle part or the arm that would perhaps make it possible. Just a taught 🙂
All in all, product as advertised, working flawlessly so far, easy enough to mount and adjustable sturdiness/looseness of each arm depending on the weight of the monitors make it a great product. I have 24″ and 27 ” monitor of different weight and adjusted each arm as needed be. So far all excellent!
Afroturf –
Honestly I was nervous because some of theblower reviews seemed pretty bad. BUT, i have a 24″ insignia tv and a 24″ samsung monitor and both installed SUPER easy, sit exactly where i want them too, and can be maneuvered into a ton of positions (including portrait mode for my home office work).
The price was so low for a decent sturdy dual monitor.
I LOVE the cable management. But I only used half the cable management system and still barely see the cables.
Even the arms themselves have a pretty nice look to them actually.
Just overall great.
Great price.
Very sturdy
Highly maneuverable.
Customizable and great cable management solutions.
Highly reccomend
Amazon Customer –
Love this thing. My monitors are light weight – 24″ LG monitors and it required setting the tension screws all the way to the lightest setting, but the lightest setting is good! Even if not you could add a little weight on the back of your monitor to make it work. Secures super well to my desk and has many settings to accommodate different thicknesses of desk. If your desk is pushed tight against the wall you might have some challenges getting the monitors to get far back on the desk, but move the base sideways and it should be fine. That’s the same issue with any of the stands though. Impressed with the cable routing as well, helps keep things uncluttered with cables as I have two different cables plus power going to each monitor. HIGHLY recommend this product.
midoriMentality –
I like that it was fairly easy to assemble, I have it grommet mounted to my desk. I’m not happy about the fact that the title said it held almost 20lbs but it’s really only rated to 15lbs, so that’s something to keep in mind. I have a 26” toshiba tv and 17” macbook mounted to the arms with adapters, and as long as you tighten the bolts in the swivel mounts (under plastic covers) The screens don’t drop forwards. As you can see in my picture, I have a box under my tv to keep it at a height I like, as this tv is a could pounds over the limit.
Ken K –
Once I started using two monitors, I needed a solution to unclutter my desk. This dual arm support system is fantastic. My two monitors are 24” and 27” and once mounted both are so easy to manipulate and position. Cable management covers are simple, and the clamp to mount to the seat is hefty and secure. My only issue was with fitting the arms onto the 100×100 VESA mounts on the back of my monitors. I have an ASUS PB278QV and an Acer XB240H, both of which have a slightly indented VESA mount position. I had to file down the edges of the mounts to fit inside this depression to properly thread the screws. Other than that, these have been great. I’ve had this setup for over a month and there has been no sagging at all.
David_Brennan_R&D –
I’m very happy with product quality. even the way it comes inthe box.
would recommend as a dual monitor stand for home or office.
Dominique LEPAGE –
J’ai lu une critique avec une vidéo sur le basculement de l’écran quand on baisse le pied. Cela me l’a fait aussi dès que j’ai installé mes écrans.
Alors en y regardant de plus près, cela se règle très facilement.
Je crois que ceux qui déplorent ce basculement n’ont pas vu que la première rotule qui est juste après la platine sur laquelle se fixe l’écran peut être resserrée.
En effet, il faut déclipser l’enjoliveur plastique de cette rotule, ce qui permet d’accéder à la vis de la rotule. Un quart de tour de clé allen plus tard et on en parle plus. Une fois cette rotule bien serrée, ça ne bouge plus.