- 7%

GoPro Surfboard Mounts (GoPro Official Mount)

(13 customer reviews)

Added to wishlistRemoved from wishlist 0
Add to compare
Last updated on July 10, 2024 11:52 pm Details
  • Perfect for surfboards, kayaks, SUPs, boat decks and more
  • Ideal for activities where maximum holding strength is needed
  • Includes FCS compatible plug for mounting to FCS center fin socket
  • Includes adhesive anchors and camera tethers for enhanced security

Specification: GoPro Surfboard Mounts (GoPro Official Mount)

Is Discontinued By Manufacturer

No

Product Dimensions

3.18 x 20.32 x 15.24 cm, 1.22 Kilograms

Date First Available

March 12 2013

Manufacturer

GoPro Accessories CA

Place of Business

SAN MATEO, CA, 94402 US

Item model number

ASURF-001

Country of origin

China

Department

Mens

13 reviews for GoPro Surfboard Mounts (GoPro Official Mount)

2.2 out of 5
3
0
0
3
7
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Andrew

    Made a mistake for not reading the reviews

    The description of this product is misleading. THERE IS NO FCS compatible plug inside the box

    Helpful(0) Unhelpful(0)You have already voted this
  2. Claudia H.

    Installed properly. First session out with it and new camera…tether didnt hold up..back up anchor still on but camera gone 🙁

    Helpful(0) Unhelpful(0)You have already voted this
  3. SithSurfer

    I’ve looked at the cheaper clone item but being a pro at loosing GoPros the genuine product seemed like the best choice. The FCS mount is rock solid, not a cheap 3-d print-out, got properly bashed around last week in waves at the end of the SUP and worked a treat. The tethers look solid, it’s a standard 3M stickpad underneath but it should do the job if everything else goes sideways.

    Helpful(0) Unhelpful(0)You have already voted this
  4. Marcus W.

    Extension tab came bent! So when mounted on the board the GoPro is a bit cockeyed… but either way this is a kooky item

    Helpful(0) Unhelpful(0)You have already voted this
  5. Tristan A Martel

    Arrived sealed in a GoPro sku ASURF-001 170720R but the FCS compatible plug for mounting to FCS center fin socket was not in the box! This was the whole reason I ordered this. Do not order this item.

    Helpful(0) Unhelpful(0)You have already voted this
  6. Wayne Friebe

    No black plastic mount which is in the photo came with this… It was the one thing I wanted! Other than that the other items are good.

    Helpful(0) Unhelpful(0)You have already voted this
  7. Amazon Customer

    Original GoPro product as described. Arrived fast.

    Helpful(0) Unhelpful(0)You have already voted this
  8. Georgia

    Hardly any stickiness to these. I followed the instructions (which I had to search online for as none are included) and before I even got in the water for my first session, the main mount detached from my board. Luckily the security extras (some which weren’t included in the pack as seen on the photo) made my GoPro hang off rather than float away. Lost the main mount in the water. Went home and tried to attach the spare second mount- didn’t even get to the beach and same issue again. No stick at all! Really upset by this as didn’t manage to get any footage of surf

    Helpful(0) Unhelpful(0)You have already voted this
  9. James King

    The one piece of this package that I needed (the FCS board mount) was missing from the package.

    Helpful(0) Unhelpful(0)You have already voted this
  10. Scott Slater

    Did not include the fcs plug or the black piece the camera screws to !!

    Helpful(0) Unhelpful(0)You have already voted this
  11. Amazon Customer

    I’ve had these out in larger surf and on my windsurfer with no problems but you need to think how to mount and apply some adhesion science to eliminate peel loads – don’t just stick onto a curved deck. All adhesives don’t like peel even the foam PSA used on the gopro.
    Step 1: scrape away old surf wax & Solvent clean. Abrade. Solvent clean. Keep the silicone paper on the 3m adhesive on the gopro mount. Dry fit to see the gaps at the sides where you need good adhesion to stop it peeling off ! (if you think just pressing hard to compress the foam adhesive on the gopro to account for a large gap is ok then you are kidding yourself)
    Step 2: Apply some Epoxy or polyester ahesive around the circle perimeter. Press the mount down to spread out the adhesive and wipe the excess of the edges (don’t put much adhesive on as you only need a bit on the edges to level the mount area). Allow this to cure. The mount will come away as still has the silicone paper on it. Now sand this to prep for bonding. Solvent wipe. Now you have a flat base to stick to all ready to go.
    Step 3: Take of the silicone paper on the gopro mount and stick it to the flat base

    I used some polyester UPOL car body filler on my polyester surf board and would use epoxy on an epoxy board. Stoked with the camera footage.

    Dr Dan the composite man.

    Helpful(0) Unhelpful(0)You have already voted this
  12. Eddie

    Very very disappointed with this product, cleaned the board up for a smooth, wax free surface, however after 5 minutes it came off. In fact the first one came off before the board entered the water. The design is nearly there, just needs to be more adhesive.

    Helpful(0) Unhelpful(0)You have already voted this
  13. Alastair

    So, I’ve had a couple of these come off. Once when I knocked it on land and once within a few seconds of putting it on. Maybe I’m not applying them exactly right or giving them enough time or whatever. But coming off ain’t cool and meant I spent my time surfing worrying that the replacement would come off too.

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    GoPro Surfboard Mounts (GoPro Official Mount)
    GoPro Surfboard Mounts (GoPro Official Mount)
    What's Best logo

    © 2023 WhatsBest.

    WhatsBest.Ca is a division of Webzir Inc.

    Stay Connected

    About

    Store ratings and product reviews are submitted by online shoppers; they do not reflect our opinions and we have no responsibility for their content.

    WhatsBest.Ca
    Logo
    Compare items
    • Total (0)
    Compare
    0
    Shopping cart