ANYCUBIC Mega Zero 2.0 3D Printer with Magnetic Suction Stickers Plate,FDM 3D Printers with Auxiliary Leveling, Printing Size 220x220x250mm,Easy…
Last updated on June 18, 2024 4:32 pm Details
- EASY&QUICK ASSEMBLY:Only 5 steps to set up,Quick installation in 10 minutes, you only need to install part of the frame, saving your time,Perfect choice for beginners and veteran Fast Heating Platform
- WITH POWERFUL SUPPLY: ANYCUBIC 3D Printer comes with a UL Certified power supply and adjustable heated Bed, that can heat the hot bed to 100℃ in just 5 minutes. RESUME PRINT FUNCTION:One click to resume from the last recorded position when suffering power outages and running out of filament,saving your time and material .
- EASY TO DEMOLD:The surface of the hot bed is equipped with elastic Magnetic suction stickers, which can be removed after printing, and the stickers can be quickly demolded by bending. The Magnetic suction sticker can restore, confidence to use.
- EASY TO OPERATE:Mega Zero 2.0 printers with an auxiliary simple leveling function,you can quickly level the hot bed before printing.Print size:8.6(L) x8.6(W) x9.8(H) in / 220x220x250mm
- RESUME PRINT FUNCTION:One click to resume from the last recorded position when suffering power outages and running out of filament,saving your time and material .
Specification: ANYCUBIC Mega Zero 2.0 3D Printer with Magnetic Suction Stickers Plate,FDM 3D Printers with Auxiliary Leveling, Printing Size 220x220x250mm,Easy…
|
4 reviews for ANYCUBIC Mega Zero 2.0 3D Printer with Magnetic Suction Stickers Plate,FDM 3D Printers with Auxiliary Leveling, Printing Size 220x220x250mm,Easy…
Show all
Most Helpful
Highest Rating
Lowest Rating
Add a review
Related Products
ANYCUBIC Mega Zero 2.0 3D Printer with Magnetic Suction Stickers Plate,FDM 3D Printers with Auxiliary Leveling, Printing Size 220x220x250mm,Easy…
Mel –
Your browser does not support HTML5 video.
I currently own an Ender 3 and an Adimlab Prusa 310×310, this 3D printer is built 100 times stronger than either of the others.
It came packaged very securely with extra parts galore. See pics….
4 screws later and I had it assembled, less than 10 minutes total.
The rails used in this printer are monstrous…it’s simply HEAVY DUTY!!!
The auto level system works great…the old piece of paper is good and all but if I’m going to run a print job over 6 days I need perfection and this is it!
At this price point there is simply no competition for this printer, I’m going to attempt to return my Ender and Adimlab and buy another.
I’m about to run a deathtrooper mask through it and will update with pics once it completes.
A great buy!!!! It’s simply a professional grade machine in comparison to my other printers.
UPDATE: 24 hours in……
The Auto level feature on this printer allows you to compensate for any warp in the bed. I am able to level the 400×400 Chiron better and easier than a 200×200 ender 3
LeBill –
I replace my old Cr-10 with this Chiron, wow it is pretty amazing the quality of this printer. Every detail is top notch. I really like the Filament in/out feature and the Auto leveling is a must.
10 mins it is assembled and another 10 mins for leveling and you are up to go. It came with all the possible tools you need to change or repair the printer and you also have all the spare part to fix it if you have some issue.
And from now I will never buy a 3d printer with a glass bed, the Ultrabed pro is the best.
Also if you look at the pictures, this is a pretty big printer 400x400x450, it is heavy and solid like a rock. In my setup, It doesn’t fit the same way my old CR10 was. I had to put it sideways and no problem for that with the Chiron I just turn the touchscreen and Voila. By the way, again I will never buy another 3d Printer if they don’t have a touchscreen.
I really like the sideways placement because you have all the action in front of you, it is very easy to replace the filament this way if you are in a tight place.
Every home should have a 3d printer and this is the one you want. I think it is the best first 3d printer to buy.
I just order a TPU flexible filament, I think the Chiron is the only printer under 1000$ that can print flexible stuff. Can’t wait to see a print with this material.
And Sorry for my English but I had to leave a review for this one. It is the best and most complete (features, extra part, and tools) 3d printer I ever use.
Burnaby Buyer –
After a couple of years and quite a bit of fidgeting and fixing and fussing, I finally got enough use out of, and was a bit sick of repairing, my Monoprice Maker Select V2 (Wanhao i3 clone). I decided it was time to upgrade to something new. After searching around on Amazon for something suitable, I settled on this VERY large format 3D printer. Setup was super fast and easy (I estimate about 25 minutes but I took my time), and after a quick auto-level (hallelujah! but carefully follow the instructions, I can tell why some people get confused!) I was printing. It’s loud and high-powered, and it takes up quite a footprint, but MAN can this thing 3D print. I haven’t tried a truly large model yet (other than the auto-level print which is a very large circle) but it’s working flawlessly.
I love the extra things it comes with: extra bearings, extra nozzles, even an extra hotend. Can’t wait to put it through the paces. Thoroughly impressed by the job ANYCUBIC has done on this!
I see from Thingiverse that some people have printed supports, etc., to make the printer a bit more solid, but I’ll see whether it’s necessary before I go ahead. So far, out of the box, it’s printing quickly and accurately.
(The “Ultrabase Pro” surface is AMAZING to get prints sticking when hot and then off when cold!)
Andy –
So this is my first 3D printer ever. I was planning to print something big. I looked around for some quotes and all were as expensive as buying the printer myself. That’s why I bought this on. Got this one through the Lightning deal so it’s really worth it.
So here’s a few Pros and Cons of the product
Pro:
– Very sturdy
– Very well constructed
– Can print very big profile (400x400x450)
– Excellent Facebook Support and After-sale support. I was having huge difficulty with calibrating the bed level (which I will talk more later). During the calibrating process, the nozzle scratched up my bed badly. And the support was very nice to offer FREE replacement for my trouble. And the Facebook group did help a lot in helping calibrating the bed
– All the components are well-mounted. Took me couple of hours just to replace the hotbed. but it was worth it
Cons:
– Calibrating the bed is not easy.
– The Autoleveling was not a very smart design at all. If you just rely on the auto level sensor alone, your nozzle will be 2-3mm off from the bed.. This is a very confusing point here. This should be a very easy fix. The designer is supposed to know the distance from the sensor to the bed and automatically subtract it . But no, they decided to leave it as is. That’s the reason why the nozzle will always be 2-3mm off from the bed.
– After autocalibrating, you can then go into the setting to MANUALLY adjust 26 points on the bed. YES, a very tedious process. When I first started, it took me almost 72 hours trying to calibrate it. It was a pain
– Should have a big warning in the manual saying that, “Check all the wheels on the X, Y, and Z axis prior to using”. I didn’t know about it at all until I started to print some test models. The first 50% was Ok… Then the machine started so skip steps and then it pulled my whole model out because the nozzle was stuck on the model. I almost gave up then. But the Facebook group suggested me to check the wheels. Then I found out some of them are overtighten so they are just gliding on the rail. They SHOULD rotate as the machine moves FYI for those who are absolutely new to 3D printing
– No Wifi capability… But if you are looking for this, you can simply use a Raspberry Pi to setup a print server. I personally use Raspberry Pi Zero W with Camera module with OctoPi OS on it. It works very well with the printer.
– Limited cable length for the LCD. But this could be solved easily by making your own harness with a 5-pin JST connector to extend the display.